Yamaha MT-07 Maintenance Schedule Chart



The following manual maintenance guide is intended for the MT-07 motorcycles of model years 2014-2023. There are several parts that require regular maintenance and attention to keep the motorcycle in prime condition and avoid damage while riding. The Yamaha MT-07 is a naked bike motorcycle launched by Yamaha since 2014. It features an M419E engine with a liquid-cooled 688cc DOHC configuration.

Periodic maintenance chart for the emission control system


  • From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
  • Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.
No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month
4000 mi
(7000 km)
or
6 months
8000 mi
(13000 km)
or
12 months
12000 mi
(19000 km)
or
18 months
16000 mi
(25000 km)
or
24 months
20000 mi
(31000 km)
or
30 months
1 * Fuel line
  • Check fuel hoses for cracks or damage.
  • Replace if necessary.
2 * Spark plugs
  • Check condition.
  • Adjust gap and clean.
     
  • Replace.
       
3 * Valve clearance
  • Check and adjust valve clearance when engine is cold.
Every 26600 mi (42000 km)
4 * Crankcase breather system
  • Check breather hose for cracks or damage.
  • Replace if necessary.
5 * Fuel injection
  • Adjust synchronization.
6 * Exhaust system
  • Check for leakage.
  • Tighten if necessary.
  • Replace gasket(s) if necessary.
7 * Evaporative emission control system (for California only)
  • Check control system for damage.
  • Replace if necessary.


General maintenance and lubrication chart


No. ITEM ROUTINE INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month
4000 mi
(7000 km)
or
6 months
8000 mi
(13000 km)
or
12 months
12000 mi
(19000 km)
or
18 months
16000 mi
(25000 km)
or
24 months
20000 mi
(31000 km)
or
30 months
1 * Diagnostic system check
  • Perform dynamic inspection using Yamaha diagnostic tool.
  • Check the error codes.
2 * Air filter element
  • Replace.
Every 24000 mi (37000 km)
3 Air filter check hose
  • Clean.
4 * Clutch
  • Check operation.
  • Adjust or replace cable.
5 * Front brake
  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
6 * Rear brake
  • Check operation, fluid level, and for fluid leakage.
  • Replace brake pads if necessary.
7 * Brake hoses
  • Check for cracks or damage.
  • Check for correct routing and clamping.
  • Replace.
Every 4 years
8 * Brake fluid
  • Change.
Every 2 years
9 * Wheels
  • Check runout and for damage.
  • Replace if necessary.
10 * Tires
  • Check tread depth and for damage.
  • Replace if necessary.
  • Check air pressure.
  • Correct if necessary.
11 * Wheel bearings
  • Check bearings for smooth operation.
  • Replace if necessary.
12 * Swingarm pivot bearings
  • Check operation and for excessive play.
  • Moderately repack with lithium-soap-based grease.
Every 32000 mi (50000 km)
13 Drive chain
  • Check chain slack, alignment and condition.
  • Adjust and lubricate chain with a special O-ring chain lubricant thoroughly.
Every 600 mi (1000 km) and after washing the motorcycle, riding in the rain or riding in wet areas
14 * Steering bearings
  • Check bearing assemblies for looseness.
  • Moderately repack with lithium-soap-based grease.
Every 12000 mi (19000 km)
15 * Chassis fasteners
  • Check all chassis fitting and fasteners.
  • Correct if necessary.
16 Brake lever pivot shaft
  • Apply silicone grease lightly.
17 Brake pedal pivot shaft
  • Apply lithium-soap-based grease lightly.
18 Clutch lever pivot shaft
  • Apply lithium-soap-based grease lightly.
19 Shift pedal pivot shaft
  • Apply lithium-soap-based grease lightly.
20 Sidestand pivot
  • Check operation.
  • Apply molybdenum disulfide grease lightly.
21 * Sidestand switch
  • Check operation and replace if necessary.
22 * Front fork
  • Check operation and for oil leakage.
  • Replace if necessary.
23 * Shock absorber assembly
  • Check operation and for oil leakage.
  • Replace if necessary.
24 * Rear suspension link pivots
  • Check operation.
  • Correct if necessary.
25 Engine oil
  • Change (warm engine before draining).
26 Engine oil filter cartridge
  • Replace.
27 * Cooling system
  • Check hoses for cracks or damage.
  • Replace if necessary.
  • Change coolant.
28 * Front and rear brake switches
  • Check operation.
29 * Control cables
  • Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly.
30 * Throttle grip
  • Check operation.
  • Check throttle grip free play, and adjust if necessary.
  • Lubricate cable and grip housing.
31 * Lights, signals and switches
  • Check operation.
  • Adjust headlight beam.

Comments

Popular posts from this blog

Honda CB300R Engine Oil Capacity and Best Oil Specifications

Yamaha R3 engine Oil Capacity and Best Oil Specifications